The random drawing winner of the Anita Goodesign Special Edition Embroidery Set of their choice is Bev L. Congratulations! Bev, I will be sending you an email today to follow up.
Here’s a quilt that I finished this weekend as a gift for my neighbor. It’s been in my unfinished bin for quite some time. His wife passed away last Spring, and he has been donating her stash to me, box by box. I took a beautiful piece of fleece that he brought me and used it for the backing. The quilting is a geometric pattern and there is no batting. It is a very soft and drapey quilt which I think will be just perfect for these chilly Spring days.
And, of course, it’s impossible for me to make anything using a rotary cutter these days, so I wanted to give you a little tutorial on how to make this using the AccuQuilt Go or Studio cutter.
The strips are scraps and are random widths. The first blocks that were made were pieced using a 10 1/2″ paper foundation. You can also use a fabric foundation. When trimmed, the blocks look like this.
To make the block into half square triangles, a 10-1/2 inch solid piece of fabric is cut and layered together with the pieced block with right sides of fabric facing each other, then a line is marked from corner to corner and stitched 1/4″ on either side of the marked line. This makes two complete blocks. All blocks are trimmed to the same size, and the quilt assembled. While I did a straight layout, the blocks could be turned many different ways to create a number of different unique layouts.
As I was stitching the last few blocks so that this quilt could be completed, I started thinking about ways to make this using my AccuQuilt cutter. I find making the blocks on a foundation very cumbersome because after stitching, each strip has to be trimmed in length. And then there is a trimming process in the end.
The first thing I tried was to make a row of strips as shown below. This strip looks nice and even, but it was made from scraps and then trimmed to 6-1/2″ using a ruler. You could make the strip any width. After the strip was trimmed, it was cut into half square triangles.
At first I used the 45 degree angle across the ruler to cut triangles. Then it occurred to me that the 8-1/2″ quarter square triangle die that cuts the triangles lengthwise would work. This made me very happy. You can see the fabric after being cut with the die shown below.
Of course, the next thing that has to be cut is the half square triangle from solid fabric that is needed to complete the block. Because the outside of the pieced half square triangle is cut on the bias, it is ideal to have the solid fabric half square triangle cut with the straight grain on the two outer edges of the block. Thus, I didn’t want to cut the solid fabric half of the square using the 8-1/2″ quarter square triangle die. The nearest size half square triangle that would match the 8-1/2″ quarter square triangle was the 6-1/2″ half square triangle.
When the pieced half square triangle and the solid half square triangle are stitched together, you will see that the solid triangle is just slightly larger and will have to be trimmed to a square. Because of the fabric grain, it is worth it to me to do that little bit of trimming because of the squaring issues that a bias quilt presents during the quilting process.
But there are other options that could be used so that one only used the quarter square triangle die or only the 6-1/2″ half square triangle die. For example, if you cut all of the triangles – solid and strips, with the 8-1/2″ QST die, then you could put them together like this and have the straight edges on the outside.
Or, you could make the strips like the original plan on a foundation and then cut both the pieced strip square and the solid square with the 6-1/2″ half square triangle die.
Hope this helps you begin to brainstorm ways to use up all those short ends of strips that you’ve cut from other projects.