Scrappy Pinwheel using the Accuquilt GO! cutter

Here’s a quick and fun pinwheel block made using the Accuquilt GO! cutter. This makes an 8 inch finished block.

You can download an instruction sheet here.

Supplies:
2 ½ inch strip die
3 ½ inch strip die
Value die

Step 1: Prepare strips and stitch pinwheels
• Cut light and dark strips using the Accuquilt Go 2 ½” strip die
• Cut light and dark strips again by laying cross-wise on the 3 ½” strip die
• Lay 2 ½” x 3 ½” pieces at right angles and stitch diagonally as shown in the diagram. Trim to ¼” along the seam line.
Note: To make sure all the pinwheels spin in the same direction, always sew the light and dark in the same direction for every piece.

Step 2: Make background pieces and stitch
• Cut light background strips using the Accuquilt Go 2 ½ inch strip die.
• Cut these strips into 4 ½” bricks using the 4 ½” square on the Value die.
• Stitch pieced strip to background strip on the long edge (see diagram) and press to the dark.

Step 3: Make blocks
• Arrange with pinwheels in the center (see diagram).
• Stitch blocks together as you would a four-patch.

 
 

Author: Marjorie Busby

My blog is about helping other quilters learn to use great tools in their quilting through what I can teach and through finding other bloggers who have good information. In addition, I am a mother and grandmother. Other hobbies include any other stitchery which makes me happy at the moment. I worked in clinical research for most of my career. I am now retired and enjoying every minute.

One thought on “Scrappy Pinwheel using the Accuquilt GO! cutter”

  1. Thank you for sharing your techniques. They are very clear and concise. I appreciate ideas and inspirations for using my AccuQuilt Go as I am a new owner and need all the ideas I can get.

Comments are closed.