GO!™ Camper and Northwoods Quilt and Border Tutorial

I have been working on a quilt using the GO!™ Camper and Northwoods dies and the embroidery that I digitized for these dies. With the embroidery, I made quilt blocks that fit a 7″ x 8″ embroidery hoop. The applique dies are often perfect for a full quilt block and that is what I like to make.  This is the quilt as I am quilting it on the longarm. You can see the Electric Quilt software version just below that.

 

I created the embroidery blocks so that there are blocks with birds flying one way and the same block with birds flying in the opposite direction. I also moved the squirrels and bunnies to different places on the blocks so it would look more natural. And of course, any of the birds, or other creatures can be omitted as there are color stops for each one.

The following information is a tutorial for making the border—specifically the triangle border. This is an image showing the measurements for each border.

The body of the quilt is made of embroidered blocks that have been cut to 8-1/2″ square (unfinished) and stitched together to make a top that is 40-1/2″ x 40-1/2″.

The first border is cut and stitched as follows:
  • Cut 5 each 2-1/2″ x width of fabric (WOF) strips. Seam together three of the strips in the same manner that you would seam binding (45 degree angle).
  • Cut  2 strips 2-1/2″ x 40-1/2″  for the inner side border and stitch to the quilt sides. Ease as needed to fit.
  • Cut 2 strips 2-1/2″ x 44-1/2″ from the three strips that were seamed together. Stitch these two strips to the quilt top and bottom that include the side strips already stitched on. Ease as needed to fit.
The second border is cut and stitched as follows (make four borders):
  • Colored Border Fabric:
    • Cut 44 each Triangle in a Square (4″ finished) Die 55753 (Shape #13) from the 8″ Qube Companion Set Angles.
    • Cut 4 Squares(4″ finished) Die 55708 (Shape 1) from the 8″ Qube Set,
  • Background Fabric:
    • Cut 40 each Triangle in a Square (4″ finished) Die 55753 (Shape #13) from the 8″ Companion Set Angles. 
    • Cut 8 each Triangle in a Square Sides (4″ finished) Die 55754 (Shape #14) from the 8″ Companion Set Angles. 

Assemble the border as follows:

Lay out one color and one background  Triangle in a Square shapes and stitch together as shown.

Lay out the next Triangle in a Square Shape and stitch. Continue stitching shapes together in a row until there are 11 color shapes and 10 background shapes.

       

When there are 11 color Triangles and 10 background triangles stitched together, add the end side triangles (Shape 14).  Complete this process four times to make four borders.

On the end of two of the borders, stitch a 4-1/2″ square (4″ finished). Stitch the borders that do not have the squares to the quilt first. Then stitch the borders with the end squares to the quilt next. I used the points of the triangles to match to the seam allowances of the quilt blocks and eased the border as needed to fit the inner border. It seemed that it might not fit or it would pucker, but once it was pinned and stitched, it fit perfectly.  Triangles are often like that because there is so much bias involved. But if you work gently and patiently, you will find they can be manipulated into place beautifully. And the great plus is that with AccuQuilt all the shapes are perfectly cut to get the perfect fit.

The third border is cut and stitched as follows:
  • Cut 6 each 2-1/2″ x WOF strips from color border fabric. Seam together three of the strips in the same manner that you would seam binding (45 degree angle). Make 2 sets of three strips seamed together.
  • Cut 2 strips 2-1/2″ x 52-1/2″ for the outer side borders. Stitch to the sides of the quilt.
  • Cut 2 strips 2-1/2″ x  56-1/2″ for the outer top and bottom borders. Stitch to the top and bottom of the quilt.

Your quilt top is finished. Just quilt as desired. With this much embroidery, a meander is a great way to quilt. I am using a water meander on mine. And of course, the borders can be quilted geometrically with rulers or with an overall fill.

 

 

  
 

Author: Marjorie Busby

My blog is about helping other quilters learn to use great tools in their quilting through what I can teach and through finding other bloggers who have good information. In addition, I am a mother and grandmother. Other hobbies include any other stitchery which makes me happy at the moment. I worked in clinical research for most of my career. I am now retired and enjoying every minute.

5 thoughts on “GO!™ Camper and Northwoods Quilt and Border Tutorial”

Comments are closed.