One of the instructions for the Trapezoid and Kite shapes for the AccuQuilt Companion Qube dies is to use the Shift and Cut Method. AccuQuilt has some videos for this, but I actually did this and made some still photos which I will post here.
Notice that I use Painter’s tape on my die. to mark about 1/8-1/4″ from the blade. This shows me exactly where to place the cut fabric when I shift for the next shape. I also use the Painter’s tape on other dies for the same purpose. I could mark it with a Sharpie, but Painter’s tape gives me the flexibility for times when I need different markings. Then I can move the tape whereas Sharpie marks are permanent.